PondMAX Black Waterfall Foam resists discolouration form UV exposure. It is perfect for sealing, filling and insulating and can be used for securing smaller rocks in waterfalls, around ponds and gardens.
- Polyurethane Foam Sealant
- Long Lasting Foam
- Fish and Plant safe
- Water Barrier Sealant
HOW TO USE: Personal Protective Equipment (PPE) is recommended.
Optimum temperature for use is between 18-27°C. Clean dust, grease and oil off surfaces to be foamed. Cover surrounding surfaces.
- Wear protective glasses or goggles, nitrite gloves and clothing that protects against dermal exposure. Use only in well ventilated areas.
- Shake well. Screw nozzle adapter onto the valve stem, being careful no to activate valve.
- With valve end of can down, slowly press trigger to dispense foam. Test on experimental surface.
- Fill cavity only 1/3 full with foam to allow for expansion. For cavities greater than 75mmm, moisten substrate before applying.
- Dries tack-free in approximately 5 minutes, cuttable within 1 hour, cures in 12-24 hours. Do not disturb uncured foam.
- Cured foam must be removed mechanically. Cured foam can be trimmed or sanded.
- Store upright in a dry area. :eave nozzle on can. To reuse, cut 3cm off nozzle tip.
- Use remainder of the can within 30 days.
YIELDS: 6.3mm (1/4") bead - 608m (1,996 linear ft). Yields are based on theoretical calculations for comparison purposes and will vary depending on ambient conditions and particular applications.


Reviews
There are no reviews yet.